EN 10277-2 standard

W.NR.: 1.0533

Non-alloy steel for structural purposes

heat analysis according to the EN 10277-2 standard

  C % Si % Mn % P % S % N % Cu %
From
To 0,045 0,045 0,012

according to the EN 10277-2 standard

Thickness mm Rolled + peeled rolled
( +SH )
Cold drawn
( +C )
hardness HB Rm (MPa) Rp0,2  minimum Rm (MPa) A5 %
(MPa) minimum
≥5≤10 510 da 650 a 950 6
>10≤16 420 da 600 a 900 7
>16≤40 da 140 a 181 da 470 a 610 320 da 550 a 850 8
>40≤63 da 140 a 181 da 470 a 610 300 da 520 a 770 9
>63≤100 da 140 a 181 da 470 a 610 255 da 470 a 740 9

* Delivery condition: as rolled.

Weldability:
Failing any prescriptions concerning chemical composition, no technical data about this steel weldability are available.

Notes:

CORRESPONDENCE WITH OTHER STANDARDS (purely as an indication):

EN 10025-2:04 EN 10025:90 UNI 7070 DIN 17 100 NF A35-501
 E295  Fe 490-2  Fe 490  St 50-2  A 50-2

E295GC.pdf